What safety precautions should be paid attention to in the operation of large CNC gantry external processing equipment?
操作人员，应熟悉并掌握龙门加工中心设备的性能与特性，保证紧急停止开关在紧急状况发生时，能快速有效的发挥作用，避免发生事故。 Large-scale CNC gantry external machining operators should be familiar with and master the performance and characteristics of the gantry machining center equipment to ensure that the emergency stop switch can quickly and effectively function in an emergency situation to avoid accidents.
Wear labor protection articles according to regulations. Never operate with gloves. Do not touch the electronic switch with wet hands when working on the equipment. Do not touch any moving parts with your hands. Do not place tools or non-machined workpieces in the gantry machining center or moving objects. on.
运转中切勿任意打开前门及左右护盖。 The computer table or work table beside the equipment must be solid, and it must not be placed on moving parts. When the workpiece is loaded or unloaded, the machine must be stopped first, and the proper distance between the workpiece and the tool must be maintained. Open the front door and the left and right covers.
After the setting of the tool is completed, please test run with DRYRUN first to ensure that the program is correct. When the power is turned off or the emergency stop is turned off, the three axes should be restored to their original positions. Do not remove the travel switch or any protection switch without authorization. Related parts.
的工作台基本上是长方形的，工作台、床身、立柱、横梁和滑枕等大铸件采用铸铁或者焊接件，铸件内腔系蜂巢式复合排列结构设计新颖，均经时效及二次回火处理，消除残留内应力使材质稳定，确保工件加工精度的稳定及机床寿命。 Before leaving the machine, you should turn off the control power switch of the operation panel and the main switch of the electrical box. The large CNC gantry processing table is basically rectangular. The large castings such as the table, bed, column, beam and ram are used. The cast iron or welded parts, the inner cavity of the castings are of a honeycomb composite arrangement structure, and are all designed with aging and secondary tempering to eliminate residual internal stress and stabilize the material to ensure the stability of workpiece processing accuracy and machine tool life.