Regarding the development trend of external machining of large-scale gantry milling , this will be the case in the future!
已经在机械加工设备中占据了重要地位，随着科技的不断发展，目前的大型数控龙门铣加工技术及装备已经是在高安全性以及智能化的进程中，今后的大型数控龙门铣加工会有怎样的发展趋势呢？ External machining of large-scale gantry milling has occupied an important position in mechanical processing equipment. With the continuous development of science and technology, the current large-scale CNC gantry milling processing technology and equipment are already in the process of high security and intelligence. What is the development trend of gantry milling ?
The gantry can use multiple milling cutters to process the surface at the same time. The machining accuracy and production efficiency are relatively high. It is suitable for machining the planes and slopes of large workpieces in batches and mass production. Efficiency, speed and accuracy are the key to machining. Performance.
采用了高速的CPU芯片、多CPU控制系统以及交流数字伺服系统，同时采取改善机床动态、静态特性等措施，让大型数控龙门铣加工的速度效率以及精度得到很大的提高。 The large-scale gantry milling adopts high-speed CPU chip, multi-CPU control system and AC digital servo system for external processing . At the same time, measures such as improving the dynamic and static characteristics of the machine tool are adopted, so that the speed efficiency and accuracy of large-scale CNC gantry milling are greatly improved.
The MTBF value of the numerical control device used in current large-scale CNC gantry milling equipment abroad can reach more than 6000h, and the MTBF value of the servo system can reach more than 30,000h. The reliability is very high. With the development of future technology, CPU chips will reach higher speeds. The servo system will also be more perfect, and the performance of large CNC gantry milling will be greatly improved.
操作注意事项： Note for external machining operations of large gantry milling :
1. Work objects should be clamped with pressure plates, screws or special tools, and ordinary casings should not be used for casing, so as not to slip and hurt people;
2. The tool must be clamped firmly, otherwise it is not allowed to drive to work;
3． Before work, check the operation of the transmission part of the machine tool and install the baffle of the machine tool to continue the operation;
4． When milling various workpieces, especially rough milling, slow cutting should be started at the beginning;
5. When moving the table and knife holder, loosen the fixing screws first;
6. When loading and unloading knives, use a copper hammer or mallet to tap lightly to prevent the cutter fragments from flying out and hurting people;
7. During cutting, it is not allowed to change the speed and adjust the tool, and it is forbidden to touch or measure the workpiece by hand.